Description
Plastigo conveyor belts are modern devices used in many different processing sectors as well as in various industries. As an important element of automation and optimization of the technological process, the conveyor belts are available in many configurations adapted to various production profiles and different Customers’ needs. Plastigo conveyor belts are price attractive for sectors of production using a conveyor transport.
Advantages:
• Solid and robust aluminum, steel or stainless-steel frame provides stability of the machine and allows quick and easy installation of the separator. It is equipped with stainless-steel infeed chute at load end.
• Conveyor belts allow to create consistent, cooperating with each other production lines. Devices are made as universal modules what allow quick installation, easy maintenance and modification when changing a conception of setting aside the details.
• Telescopic legs. Fitted under the transporter or by its edge, they allow to regulate height and angle of the machine quickly and easily. Polyurethane swivel castors 100mm diameter with a brake allow moving and setting the machine on the right spot.
• Solid and sealed edges The belt of the conveyor adhere closely to the side walls, prevents from jamming small details at the edges. The parallel side frames ensure centering of the belt and prevents from loosing the moulders.
• The side walls of CB, CBD and SV conveyor belts are made out of antifriction material (polyzene). They are directly fitted on the conveyor’s belt prevents from getting small parts underneath the belt or jamming them by the edges.
• High torque gear motor Steel or polyurethane drive shaft increases stiffness of the belt and provides effective power transmission. Drived via motor of 0,22 kW mounted directly on the drive shaft and self-centering supports.
• Non-slip, triple-layer, hight resistance belt PVC belt (resistant up to 60°C) or PU belt (resistant up to 120°C) made of triple-layer, provides high transverse stiffness of the belt.
• Control system using the inverter Control box with a built-in inverter allows a smooth regulation of belt’s speed, work based on signal provided by any external device, choice between continuous and discontinuous operation and change of belt direction.
• Teflon in structural elements. Teflon is characterized by non-inflammability, outstanding chemical resistance and it is physiologically neutral (suitable for food contact). It has good sliding properties, wide range of work temperatures, high resistance to UV radiation and good electrical insulating properties. It guarantees a low coefficient of friction.
• Powder coating Powder coating is used in protective, anti-corrosion and decorative purpose. It guarantees a smooth surface, without fractures, damp patches or bubbles. It protects from high temperature and chemical factors.
• Hydraulic support stand (CBL, CBDL) Allows quick and easy adjustment of height and tilt angle of the conveyor belt with a support of the hydraulic ram. What is more, the stand is equipped with polyurethane swivel castors 100mm diameter with brake facility what allows easy moving of the conveyor belt.
CL CONVEYORS
Standard features
• framework in painted steel ral 7016;
• mounted on telescopic support legs;
• flat blue PVC belt with flights h 20 mm, pitch 500 mm;
• sidewalls h 75 mm;
• three sided infeed chute;
• fixed speed 4 mt/min;
• three phase motor / gearbox kw 0.25;
• electronical switch with clean contact receipt 400 V/3ph/50 Hz.
Variations according to the needs
• non slip blue PVC belt;
• flat blue PVC belt;
• flat blue PVC belt with flights h 30 mm, pitch 500 mm;
• fixed speed 6 mt/min.
Options
• speed 1.4 Mt/min (gearbox, ratio 1/240);
• steel 430 output chute;
• special colour;
• special voltage (single phase not available) or UL/CSA;
• connector phoenix for clean contact;
• variable speed;
• control boxes;
• paddle and roll separators.
For inquiries and orders – HERE
PNL CONVEYORS
Standard features
• framework in painted steel ral 7016;
• adjustable height from belt level to ground min. 460 mm max. 1260 mm;
• adjustable angle from 0 to 25°;
• flat blue PVC belt;
• sidewalls h 75 mm (or without sidewalls;)
• fixed speed 4 mt/min, 6 mt/min;
• three phase motor / gearbox kW 0.25;
• electronical switch with clean contact receipt 400 V/3ph/50 Hz.
Options
• adjustable height from belt level to ground min. 460 mm - max. 2060 mm;
• motorgearbox underneath the conveyor with chain drive system;
• speed 1.4 mt/min (gearbox r 1/240);
• steel 430 three sided infeed chute open at 33° - for all models;
• special colour;
• special voltage (single phase not available) or UL/CSA;
• steel 430 output chute;
• connector phoenix for clean contact;
• variable speed;
• control boxes;
• paddle and roll separators.
For inquiries and orders – HERE
CB CONVEYORS
Standard features
• framework in painted steel ral 7016;
• mounted on central telescopic support legs;
• flat blue polyurethane belt with flights h 20 mm,pitch 500 mm;
• blue antifriction material (polyzene) sidewalls h 95 mm;
• reversible two sided infeed chute at loading areawith side inlet chute;
• fixed speed 4 mt/min;
• three phase motor / gearbox kW 0.25;
• electronical switch with clean contact receipt 400 V/3ph/50 Hz.
Variations according to the needs
• flat blue polyurethane belt with flights h 30 mm,pitch 500 mm;
• non-slip blue PVC belt;
• fixed speed 6 mt/min.
Options
• three sided infeed chute open at 33° - for all models;
• speed 1.4 Mt/min (gearbox, ratio 1/240);
• steel 430 output chute;
• special colour;
• special voltage (single phase not available) or UL/CSA;
• connector phoenix for clean contact;
• variable speed;
• control boxes;
• single roll separator.
For inquiries and orders – HERE
Video - HERE
CBD CONVEYORS
Standard features
• framework in painted steel ral 7016;
• equipped with paddle separator;
• mounted on central telescopic support legs;
• non-slip blue PVC belt;
• blue antifriction material (polyzene) sidewalls h 95 mm;
• reversible two sided infeed chute at loading area with side inlet chute;
• fixed speed 4 mt/min;
• three phase motor / gearbox kw 0.25;
• electronical switch with clean contact receipt 400 V/3ph/50 Hz.
Variations according to the needs
• flat blue polyurethane belt with flights h 8x8 mm, pitch 500 mm;
• flat blue polyurethane belt with flights h 30 mm, pitch 500 mm;
• fixed speed 6 mt/min.
Options
• conveyor without paddle separator but pre-set;
• paddle separator at opposite side;
• three sided infeed chute open at 33° - for all models;
• speed 1.4 Mt/min (gearbox, ratio 1/240);
• steel 430 output chute;
• special colour;
• special voltage (single phase not available) or UL/CSA;
• connector phoenix for clean contact;
• variable speed;
• control boxes;
• single roll separator.
For inquiries and orders – HERE
Video - HERE
SV CONVEYORS
Standard features
• framework in painted steel ral 7016;
• equipped with paddle separator;
• mounted on telescopic support legs;
• non-slip blue PVC belt;
• blue antifriction material (polizene) sidewalls h 95 mm;
• three sided infeed chute;
• fixed speed 4 mt/min;
• three phase motor / gearbox kW 0.25;
• electronical switch with clean contact receipt 400 V/3ph/50 Hz.
Variations according to the needs
• flat blue polyurethane belt with flights h 8x8 mm, pitch 500 mm;
• flat blue polyurethane belt with flights h 20 mm, pitch 500 mm;
• flat blue polyurethane belt with flights h 50 mm, pitch 500 mm;
• fixed speed 6 mt/min.
Options
• conveyor without paddle separator but pre-set for its application;
• paddle separator at opposite side;
• steel AISI 430 output chute;
• speed 1.4 mt/min (gearbox ratio 1/240);
• special colour;
• special voltage (single phase not available) or UL/CSA;
• connector phoenix for clean contact;
• variable speed.
For inquiries and orders – HERE
KRASCO